User's Manual

4. Web Configuration
AirLive N.Plug User’s Manual
35
Fragment Threshold Fragmentation mechanism is used for improving the efficiency
when high traffic flows along in the wireless network. If the
802.11g MIMO Wireless Router often transmit large files in
wireless network, you can enter new Fragment Threshold value to
split the packet. The value can be set from 256 to 2346. The
default value is 2346.
RTS Threshold RTS Threshold is a mechanism implemented to prevent the
“Hidden Node” problem. If the “Hidden Node” problem is an issue,
please specify the packet size. The RTS mechanism will be
activated if the data size exceeds the value you set.
Warning: Enabling RTS Threshold will cause redundant network
overhead that could negatively affect the throughput performance
instead of providing a remedy.
This value should remain at its default setting of 2347. Should you
encounter inconsistent data flow, only minor modifications of this
value are recommended.
Beacon Interval Beacon Interval is the amount of time between beacon
transmissions. Before a station enters power save mode, the
station needs the beacon interval to know when to wake up to
receive the beacon. Range 20-1024 ms, default is 100.
Preamble Type A preamble is a signal used in wireless environment to
synchronize the transmitting timing including Synchronization and
Start frame delimiter. You can select Long or Short for the
preamble type.
IAPP Select Enabled or Disabled to execute this function.
Protection Select Enabled or Disabled to execute the security function.
Aggregation Select Enabled or Disabled to execute this function.
Short GI Select Enabled or Disabled to execute this function.
WLAN Partition Select Enabled or Disabled to execute this function.
20/40MHz Coexist Select Enabled or Disabled to execute this function. The default is
enabled.
RF Output Power Select the transmitting power rate 100%, 70%, 50%, 35%, 15%.