User's Manual

4. Web Configuration
AirLive N.Plug User’s Manual
54
4.3.4 Port Forwarding
Enable Port
Forwarding
Check to enable Port Forwarding function.
IP Address Enter the IP address in the field.
Protocol Select the protocol (TCP, UDP or Both) used to the remote
system or service.
Port Range For TCP and UDP Services, enter the beginning of the range of
port numbers used by the service. If the service uses a single port
number, enter it in both the start and finish fields.
Comment You may key in a description MAC address.
Apply Changes After completing the settings on this page, click Apply Changes
button to save the settings.
Reset Click Reset button to restore to default values.
Current Port
Forwarding Table
Shows the current Port Forwarding information.
Delete Selected Click Delete Selected button to delete items which are selected.