User's Manual

4. Web Configuration
AirLive N.Plug User’s Manual
60
4.4 System
4.4.1 LAN Interface
IP Address
Shows the IP address of the Wireless Router. Default IP address is
192.168.1.254 (Router/AP mode) or 192.168.1.253 (Client Mode).
Subnet Mask The subnet mask of the Wireless Router (Default subnet mask is
255.255.255.0.)
Default Gateway Enter the Gateway IP address here.
DHCP Disable: Select to disable this Wireless Router to distribute IP
addresses to connected clients.
Server: Select to enable this Wireless Router to distribute IP
Addresses (DHCP Server) to connected clients. And the following
field will be activated for you to enter the starting IP address.
DHCP Client
Range
The starting address of this local IP network address pool. The pool
is a piece of continuous IP address segment, the device will
distribute IP addresses from 192.168.1.100 to 192.168.1.200 to all
the computers in the network that request IP addresses from DHCP
server (Router). The end IP address maximum is 253.
Note:
If “Continuous IP address pool starts” is set at 192.168.1.1 and the