User's Manual

5. PC Configuration
AirLive N.Plug User’s Manual
72
5.1 Overview
For each PC, the following may need to be configured:
z TCP/IP network settings
z Internet Access configuration
z Wireless configuration
5.2 Windows Clients
z This section describes how to configure Windows clients for Internet access via the
Wireless Router.
z The first step is to check the PC's TCP/IP settings.
z The Wireless Router uses the TCP/IP network protocol for all functions, so it is
essential that the TCP/IP protocol be installed and configured on each PC.
5.2.1 TCP/IP Settings – Overview
If using default Wireless Router settings, and default Windows TCP/IP settings, no changes
need to be made.
z By default, the Wireless Router will act as a DHCP Server, automatically providing a
suitable IP address (and related information) to each PC when the PC boots.
z For all non-Server versions of Windows, the default TCP/IP setting is to act as a DHCP
client.
If using a Fixed (specified) IP address, the following changes are required:
z The Gateway must be set to the IP address of the Wireless Router.
z The DNS should be set to the address provided by your ISP.
5
5. PC Configuration