User's Manual

1. Introduction
AirLive N.Plug User’s Manual
4
WPS button
Press the physical WPS button on the Wireless Router once, or go
to enable the WPS function via web configuration (Go to Wireless >
WPS page), then the LED will start to flash. Please make a
connection with other WPS supported device within 2 minutes.
LED Behavior
LED Printed Color Behavior Indication
Off Power off
On Power on
POWER PWR Green
Flashing System is resetting.
Flashing Try to surf Internet
Off Surfing Internet is successfully
Internet Internet Yellow
On Fail to surf Internet
Off WLAN function off
On WLAN link / active
Wireless
LAN
WLAN Yellow
Flashing WLAN traffic transmitting
Off No Ethernet cable connecting
On Ethernet cable connected
WAN/LAN
1 port
(Ethernet)
WAN/LAN1 Green
Flashing Receiving/ sending data
Off No Ethernet cable connecting
On Ethernet cable connected
LAN 2 Port
(Ethernet)
LAN2 Green
Flashing Receiving/ sending data