User's Manual

4. Configuration: Router Mode

AirLive N.Power User’s Manual

 Encryp Type: You can use one of the following 4 encryption type.

 None: No encryption is made. This is not recommended as it posts serious

security issue.

 WEP: This is the most compatible type. However, it is also easier for

hackers to break. Use this only if AES or TKIP doesn’t work.

 TKIP: Temporal Key Integrity Protocol, TKIP is more secured than WEP but

less secure than AES.

 AES: The most secured encryption method. It is highly recommended to

use this method unless for compatibility issue.

 Encryp Key: Please enter your encryption key here.

 MAC Address: Please enter the Wireless MAC address or BSSID of the remote

Bridge. You can usually find it at remote Bridge’s device label.

4.4.11 WPS Settings

Example1: Using Hardware Push button

Please push WPS button directly on the back of the N.Power. The “WPS” LED flash will

light and the N.Power will start to survey the client’s WPS signal in the current environment.

Please be noticed that, within two minutes, you have to turn on the utility of your wireless

network card and click PBC to connect automatically.

If you also have a hardware WPS button on your wireless card, you can push the button

immediately now. If not, you can usually find the WPS PBC function in the wireless utility.

Below is an example using AirLive WN-360USB wireless network card to connect with

N.Power.