User's Manual

5. System Configuration and Status Menu
47 AirLive N.Power User’s Manual
5.2.2 Add DHCP Static Lease Client
If you want to lock IP address to a MAC address, you should add DHCP clients to the
“Static DHCP Client”. Up to 40 entries can be entered. Below is the procedure for
adding an entry:
5. 1. Enter the MAC address of the device
6. 2. Enter the IP address of the device
7. 3. Click on the “Add” button
5.3 Time Settings
System Configuration ->Time Settings
You can set the N.Power’s internal system clock by 2 methods. First is to enter the time
manually. Second is to set the time by NTP server. We strongly recommend setting the
time by NTP server because it will sync the time with remote server even after power
recycling. In another word, you will not lose time settings after power off.
 Sync with Host: Push this button to copy the time from your PC
 Time Zone: Select your nearby city here
 NTP Server: This is the time server where your N.Power will sync the time with.
 NTP Synchronization: How often your N.Power will sync the time with remote NTP
server.
Please remember to apply change after completing all settings.