User's Manual

6. AP Mode

AirLive N.Power User’s Manual

 Disable: When selected, no MAC address filtering will be performed.



Allow list: When selected, data traffic from only the specified devices in the

table will be allowed in the network.

 Deny list: When selected, data traffic from the devices specified in the table

will be denied/discarded by the network.

6.2.5 Associated Client

Wireless Settings -> Associated Client

You can check the wireless clients’ status on this table

 MAC Address: MAC address of the wireless clients. If you need to find the IP

address, please go to Status->Client Table menu.

 Power Saving: 0: The power saving mode is off. 1: The power saving mode is on.

 Modulation: Show the which MCS level is used in 11n mode

 Channel Width: This indicates whether client is using 20MHz or 40MHz channel

width.

 RSSI (dBm): The signal strength of the client device.

 Time (Sec): The connected time of the wireless client.