User's Manual

10. Frequent Asked Questions
77 AirLive N.Power User’s Manual
In this chapter, we will address some frequent asked questions about N.Power
Question: I plug my 3G USB dongle into Air3G, but it cannot be recognized
Answer: Please go to Air3G webpage at
www.airlive.com
and check the USB
compatibility list. If your USB is on the compatibility list, please make sure
you plug in the USB dongle while the Air3G is powered off.
===================================================================
Question: After Emergency Upgrade, I can’t find my N.Power at 192.168.1.254
Answer: The N.Power will restore to the previous settings after successful Emergency
upgrade. Therefore, the IP address will change to the previous IP address.
If you still can’t find N.Power in previous address, please do a restore to
default and the N.Power should appear at 192.168.1.254
====================================================================
Question
: When I wan to use “Site Survey” tool to connect with a AP that has no
encryption, why does the N.Power report “encryption type mismatch!” and ask
me to configure the wireless security settings?
Answer: When you press “Connect” from site survey, the N.Power will first check if the
current wireless encryption setting is correct. If not, it will ask you to modify
the setting. Therefore, if your current wireless settings has encryption and
the new AP you want to associate does not use encryption, and then the
N.Power will report the mismatch. In this case, simple select “Disable” in the
encryption field and press “Apply Change”.
====================================================================
Question: When I change my wireless operation mode, why can’t I find my AP anymore?
Answer: By Default, the DHCP server is turned on in Router mode. In other modes,
the DHCP server is turned off. If you get your IP address automatically, then
when you change from Router to AP/Client/WDS Bridge mode, your PC will
10
10. Frequent Asked
Questions