User Manual

OVHS084-PSP User Manual
Page 3 of 5
Instruction:
1. Choose the right quick disconnect cord and connect it to the phone’s headset jack
a) For Polycom IP phone models have RJ9 headset jack, like VVX series, Microsoft Lync CX
series, SoundPoint 335 and above, choose the RJ9 Quick Disconnect Cord and connect it to
back of the phone as picture below:
(Polycom has many different phone models; not all the RJ9 headset jack
ports are located in the same place. But most the headset jack ports should
have “HEADSET” or a headset icon near it like shown on the image to the
right.)
b) For Polycom SoundPoint IP 321, 331, 331c, SoundPoint Pro SE-220, SE-225 phones, choose
the 2.5mm Quick Disconnect Cord and connect it to the low right hand side of the phone:
2. Connect the headset with the quick disconnect cord
3. Adjust the length of the headband and turn the earpieces slightly until the headset fits
comfortably.
4. Rotate the microphone boom to put the microphone in front of the mouth.