Manualshelf

User Manual

ManualsBrandsOvisLink ManualsAccessories & SuppliesCall Center Headset Training Adapter Compatible with All RJ9 Headsets, Included Wireless headsets | Connect 2 RJ9 headsets to 1 Telephone | Mute Buttons for Each of The Headsets
123
Page 2 of 3
Or, if your phone has a 2.5mm headset jack, not a RJ9 headset jack, use the RJ9
to 2.5mm cord instead.
3. Connect two OvisLink headsets in port A and port B of the training adapter
with OvisLink Quick Disconnect cords with Yellow tape at the RJ9 connector.
4. Press Mute button A to mute microphone of the headset connected to port A.
Press Mute button B to mute the microphone of the headset connected to
port B.
Scenario 2: The telephone has RJ9 headset jack. The OvisLink headset that
works with the telephone has a BLUE tape or RED tape at the RJ9 connector.
1. Set the switch next to the TEL port on the training adapter at position “2”.