User's Manual

AirLive Traveler 3G II User’s Manual

 Wireless Settings

Wireless settings allow you to set the wireless configuration items.

1. Wireless: Enabled is the default. Selecting this option will allow you to

set your Wireless Access Point (WAP) settings.

2. Transmit Power: Configure the wireless output power here.

3. Network ID (SSID): Service Set Identifier (SSID) is the name

designated for a specific wireless local area network (WLAN). The

SSID's factory default setting is default. The SSID can be easily

changed to establish a new wireless network. ( Note: SSID names may

contain up to 32 ASCII characters).

4. SSID Broadcast: The router will broadcast beacons that have some

information, including ssid so that wireless clients can know how many

AP devices by scanning function in the network. Therefore, this function

is disabled; the wireless clients can not find the device from beacons.

5. Channel: Auto is the default. Devices on the network must share the

same channel. (Note: Wireless adapters automatically scan and match