User's Manual

3.3.1.3 Wireless Setting

Wireless settings allow you to set the wireless configuration items.

Wireless : The user can enable or disable wireless function.

Network ID (SSID): Network ID is used for identifying the Wireless LAN (WLAN). Client stations

can roam freely over this product and other Access Points that have the same Network ID. (The

factory setting is “default”)

SSID Broadcast: The router will Broadcast beacons that have some information, including SSID

so that the wireless clients can know how many ap devices by scanning function in the network.

Therefore, this function is disabled, the wireless clients can not find the device from beacons.

Channel: The radio channel number. The permissible channels depend on the Regulatory

Domain. The factory default setting is as the following: channel 11 for North America; channel 13

for European (ETSI).

WPS (WiFi Protection Setup)

WPS is WiFi Protection Setup which is similar to WCN-NET and offers safe and easy way in

wireless Connection.