User's Manual

WPA/WPA2

Check Box was used to switch the function of the WPA. When the WPA function is enabled, the

Wireless user must authenticate to this router first to use the Network service. RADIUS Server

The router will detect automatically which Security type (Wpa-psk version 1 or 2) the client uses to

encrypt.

IP address or the 802.1X server’s domain-name.

Select RADIUS Shared Key

If you select HEX, you have to fill in 64 hexadecimal (0, 1, 2…8, 9, A, B…F) digits

If ASCII, the length of Pre-share key is from 8 to 63.

Key value shared by the RADIUS server and this router. This key value is consistent with the key

value in the RADIUS server.

Wireless Client List

3.3.1.4 Change Password

You can change Password here. We strongly recommend you to change the system password for

security reason.