User's Manual

1.2.3 Installation Steps

Step 1. Connect with the Ethernet patch cable:

Insert the Ethernet cable into RJ45 Ethernet Port on

the back panel. And then plug the other end of RJ45

into the computer or Laptop computer. The LED of

Internet connection will show green color if the

Ethernet connection is normally connected.

Step 2. Insert the RJ11 cable for ADSL

Step 3. Connect the power adapter:

Plug the other end of the power adapter into a wall

outlet.

Step 4. power on

Switch the power on in front of this WiFi ADSL Router

Step 5. Start to configure the device:

You can start to configure the device via the Easy

Setup.

(see Easy Setup Utility)