User's Manual

15
BioConnect engine: The BioConnect engine couples to the pump and creates the flow
QR Code Reader: Reads the QR code label on the cartridge. This lets the system know the BioConnect version
and serial number for traceability.
Front USB plug: Can be used to copy data or proceed to software update during maintenance operations.
Touch screen: Gives access to the user interface.
Back
USB plugs: For maintenance purposes. Used to connect a mouse and a keyboard directly to the device
embedded PC
HDMI: For maintenance purposes. Used to connect a screen directly to the device embedded PC
Ethernet plugs: The ethernet plug is used to connect your device to your local network. This allows remote
control and data backup on shared drives.
Power plug: The power inlet connects the instrument to an electrical outlet through the supplied power
adapter.
Heat sink: cools the device without fan.
Cautions
Never insert anything else than a BioConnect cartridge into the cartridge holder
Never clamp the input or the output of the BioConnect this may cause leaks or device malfunction
Accessories
BioConnect (disposable tube set) description
The BioConnect has been developed to address all types of benchtop bioreactors, including disposables and
rocking motion bioreactors.
It is equipped at both inlet and outlet with PVC tubing for welding, or male Luer locks for connecting to female
Luer locks under a LAF hood.
The inlet of the BioConnect must be connected to a dip tubing that dives into the culture. The outlet of the
BioConnect can be connected to a surface port, or any available port in case there is no surface port available.