User's Manual

90
High intensity light source
This instrument includes a high intensity red LED light source. There is no hazard for the operator’s
eyes when the device housing is closed. Do not stare at the light source or at the light beam during
maintenance when the housing is opened.
Replaceable parts
Battery
The equipment is supplied with an onboard computer which contains a replaceable battery. The
battery is only to be replaced by qualified personnel. Battery type CR2032 (Li-ion 3 V, 225 mA) should
be used
Known issues
Issue
Workaround
USB storage device on front usb port not recognized
Try other usb storage device or one of the usb ports
at the back
Unrecoverable OsOne crash due to power loss
during critical file writing
Use UPS
Restore the software configuration via your Disaster
Recovery Procedure
Front seal leaving marks on wipe when cleaning
Accept as is. No degradation of seal.
Black heatsing at the back leaving marks on wipe
when cleaning
Accept as is. No degradation of coating.
Do not spray cleaning agent on the surface.
Use other cleaning agent.