User's Manual

91
Specifications
ILine F Pro
Type
iLine-F Holographic transmission microscope
Light source
Partially coherent monochromatic LED 630nm (Red)
Sensor
CMOS camera – 5MPixels - 8 bits
Microscope objective
Olympus LUCPLFLN20X Microscope Objective 20x
Total Magnification
22.2X
Lateral resolution
1µm
Field of view
318µm x 318µm
Acquisition rate
15fps
Data volume
128Mb per measurement point
Power consumption
45W Typical, 90W Max
Cleaning agents
Cleaning the external surfaces of the device was tested with the following
agents :
• IPA (IsoPropyl Alcohol)
• Spor-Klenz
®
(STERIS Life Sciences)
• Vesta Syde SQ Disinfectant (STERIS Life Sciences)
Operating System
Windows 10 LTBS
Cell monitoring performance
The device, together with the imaging equipment, provides a ± 10% cell
density variation and Cell counting range of 0.5 to 10 Mcells/mL
Integration capabilities
Automation via RestFUL web services
OPC ready
Physical data
Device
400 (15.7’’ - L) x 223 (9.2” - W) x 423 (16.7” - H) mm – 21kg
Shipment box
515 x 320x 550 mm
Environmental conditions
General
Indoor and dry use only
Temperature
15 to 25°C
Humidity
Lower than 80%, non condensing
Altitude
Less than 2000m above sea level
Particle level
The system is designed to operate in unclassified areas.