Manualshelf

Product Specifications

ManualsBrandsOwens Corning ManualsRoof Shingles665550
12345678910
Fiberglass-Based Asphalt Shingles & Accessories
PROJECT ARCHITECT RESPONSIBILITY: This is a general specification guide, intended to be used by experienced construction
professionals, in conjunction with good construction practice and professional judgment. This guide is to aid in the creation of a
complete building specification that is to be fully reviewed and edited by the architect of record (specifier). Sections of this guide
should be included, edited, or omitted based on the requirements of a specific project. It is the responsibility of both the specifier
and the purchaser to determine if a product or system is suitable for its intended use within their projects respective zip code.
Neither Owens Corning, nor any of its subsidiary or affiliated companies, assume any responsibility for the content of this
specification guide relative to actual projects and specifically disclaim any and all liability for any errors or omissions in design,
detail, structural capability, attachment details, shop drawings or other construction related details, whether based upon the
information provided by Owens Corning or otherwise.
SECTION 07 31 13.13 - FIBERGLASS-BASED ASPHALT SHINGLES
& ACCESSORIES
PART 1 GENERAL
1.1 SECTION INCLUDES
A. Roof shingles and accessories including the following:
1. Fiberglass-based asphalt shingles.
2. Hip and ridge shingles.
3. Starter shingles.
4. Self-adhering ice and water barrier.
5. Shingle underlayment.
6. Attic ventilation.
7. Fasteners.
8. Metal flashing and trim.
1.2 RELATED SECTIONS
**NOTE TO SPECIFIER** Delete and/or add other sections as required.
A. Section 061000 - Rough Carpentry.
B. Section 071300 – Sheet Waterproofing.
C. Section 072200 - Roof and Deck Insulation; for insulation placed over roof decking.
D. Section 076000 - Flashing and Sheet Metal; for snow guards, metal flashing and drip edges, including
step-type flashing installed with shingles.
E. Section 077100 – Roof Specialties: Manufactured Gutters and Downspouts.
F. Section 077200 - Roof Accessories.
G. Section 086000 – Roof Windows and Skylights.
**NOTE TO SPECIFIER** Delete references from the list below that are not required.
1.3 REFERENCES
A. American Society of Civil Engineers (ACSE):
1. ASCE 7 – Minimum Design Loads for Buildings and Other Structures.
B. Asphalt Roofing Manufacturers Association (ARMA).

Summary of content (23 pages)