Product Specifications

Fiberglass-Based Asphalt Shingles & Accessories
A. Submit under provisions of Section 013300 - Submittal Procedures.
B. Submit printed copies of Owens Corning product data sheets indicating product characteristics,
product information, installation instructions (including required preparation and installation procedures)
and product limitations and color samples.
C. Certificate of Compliance: Provide Certificate of Compliance from independent laboratory indicating
that Owens Corning asphalt shingles made in normal production meet or exceed the requirements of
the following:
1. ASTM D3462.
2. ASTM D3161/D7158 – Indicating a Class of Wind Resistance.
3. ASTM E108/UL790 – Indicating Class A Fire Resistance.
D. LEED submittal: When appropriate provide a LEED submittal and coordinate with provisions in Section
013563 – Sustainability Certification Project Requirements and Section 013566 – Sustainability
Certification Project Procedures.
E. Shop Drawings: Indicate specially configured metal flashing, jointing methods and locations, fastening
methods and locations, and installation details as required by project conditions.
F. Copy of Warranty: For warranty specified in Section 1.9.
**NOTE TO SPECIFIER** Delete selection samples if colors have already been selected.
G. Selection Samples: Two complete sets of samples, representing manufacturer's full range of available
products and colors.
H. Verification Samples: For each product and finish specified, two samples representing actual products
and colors.
1.7 PRE-INSTALLATION MEETING
A. For all projects, a pre-installation meeting is strongly recommended. Conduct a pre-installation
meeting at the site prior to commencing work in this section. Require attendance of entities directly
concerned with roof installation.
Topics to be discussed:
1. Safety procedures.
2. Installation procedures/method (including substrate preparation), sequencing of materials, and
coordination with installation of other/adjacent work.
3. Roofing material availability, storage and handling.
4. Additional roof covering and roof accessory materials.
5. Through roof penetrations and other roof details.
6. Product compliance – Verify that products comply with requirements specified by local Authority
Having Jurisdiction (AHJ)
7. All other items related to successful execution/completion of work.
B. Submit printed copies of Owens Corning product data sheets indicating product characteristics,
product information, installation instructions (including required preparation and installation
procedures), product limitations and color samples.
1.8 QUALITY ASSURANCE
A. Manufacturer Qualifications: Provide all primary roofing products, including shingles, underlayment,
ice and water barrier, and ventilation, by a single manufacturer.