Installation Instructions

3-T

HINGLES

EJAS DE 3-

ABLILLAS

For Owens Corning

™

Standard and Metric Size Shingles

Instrucciones Para la Instalacion de

Tejas Estandard y Metricas de

Owens Corning

™

UPREME

LASSIC

PAGE 1
Installation Instructions For Owens Corning™ Standard and Metric Size Shingles Instrucciones Para la Instalacion de Tejas Estandard y Metricas de Owens Corning™ 3-TAB SHINGLES TEJAS DE 3-TABLILLAS SUPREME® CLASSIC®
PAGE 2
™ ™ ™ ™
PAGE 3
™ ™
PAGE 4
™ ™
PAGE 5
Hip and Ridge Application Owens Corning™ Hip & Ridge Available by region. If cutting 3-tabs for hip & ridge, adhere to the following instructions. Cut full three-tab shingles into three 12” x 12” (13 1/4” x 13 1/8” metric) hip and ridge shingles. Start hips at the eave and work up to ridge. Apply ridge only after hips have been applied, beginning on end of ridge opposite prevailing wind direction. Leave 5” (5 5/8” metric) exposure per shingle for hip and ridge application.
PAGE 6
™ ™
PAGE 7
PAGE 8
OWENS CORNING ROOFING AND ASPHALT, LLC ONE OWENS CORNING PARKWAY TOLEDO, OHIO, USA 43659 1-800-GET-PINK® www.owenscorning.com Pub. No. 20475-H. Printed in U.S.A., October 2010. THE PINK PANTHER™ &©1964-2010 Metro-Goldwyn-Mayer Studios Inc. All Rights Reserved. The color PINK is a registered trademark of Owens Corning. ©2010 Owens Corning.