Dimensions Guide

Disclaimer of Liability
Technical information contained herein is furnished without charge or obligation and
is given and accepted at recipient’s sole risk. Because conditions of use may vary and
are beyond our control, Owens Corning makes no representation about, and is not
responsible or liable for the accuracy or reliability of data associated with particular
uses of any product described herein. SCS Global Services provides independent
verication of recycled content in building materials and veries recycled content claims
made by manufacturers. For more information, visit www.SCSglobalservices.com.
LEED
®
is a registered trademark of the U.S. Green Building Council.
Pub. No. 10013811-E. Printed in U.S.A. August 2019.
© 2019 Owens Corning. All Rights Reserved.
OWENS CORNING INSULATING SYSTEMS, LLC
ONE OWENS CORNING PARKWAY
TOLEDO, OHIO, USA 43659
www.owenscorning.com
Design Considerations
• For optimum insulation performance the building thermal barrier
(insulation) should be in continual alignment with the building air
barrier. In framed cavities, the product thickness should match
the depth of the framing members.
• Follow the local, applicable building code(s) to determine the
need for and placement of a vapor retarder.
• Do not install insulation on top, or within 3 inches of a recessed
light xture unless the xture is labeled as
“insulation contact” (IC) rated.
• Kraft and standard foil facings will burn and cannot be left
exposed. Install facings in substantial contact with the
assembly nish material. Protect from open ame or other heat
source.
Availability
WIDTH LENGTH THICKNESS R-VALUE
Metal Frame
Construction
16"
(406mm)
24"
(609mm)
48"
(1,219mm)
96"
(2,438mm)
3 1/2"
(89mm)
11
16"
(406mm)
24"
(609mm)
48"
(1,219mm)
96"
(2,438mm)
3 1/2"
(89mm)
13
16"
(406mm)
24"
(609mm)
96"
(2,438mm)
3 1/2"
(89mm)
15
16"
(406mm)
24"
(609mm)
96"
(2,438mm)
6"
(152mm)
21
Wood Frame
Construction
Walls
11"
(406mm)
93"
(2,362mm)
105"
(2,667mm)
3 1/2"
(89mm)
11
11"
(406mm)
93"
(2,362mm)
3 1/2"
(89mm)
13
11"
(406mm)
105"
(2,667mm)
3 1/2"
(89mm)
15
11"
(406mm)
93"
(2,362mm)
6 1/4"
(159mm)
19*
12"
(406mm)
48"
(1,219mm)
9 1/2"
(241mm)
30
15"
(381mm)
23"
(584mm)
48"
(1,219mm)
93"
(2,362mm)
3 1/2"
(89mm)
11
15"
(381mm)
23"
(584mm)
48"
(1,219mm)
93"
(2,362mm)
3 1/2"
(89mm)
13
15"
(381mm)
23"
(584mm)
93"
(2,362mm)
3 1/2"
(89mm)
15
15"
(381mm)
19 1/4" 23"
(584mm)
48"
(1,219mm)
93"
(2,362mm)
6 1/4"
(159mm)
19*
15"
(381mm)
23"
(584mm)
93"
(2,362mm)
5 1/2"
(139mm)
20
15"
(381mm)
23"
(584mm)
93"
(2,362mm)
5 1/2"
(139mm)
21
15"
(381mm)
23"
(584mm)
105"
(2,667mm)
5 1/2"
(139mm)
21
23"
(381mm)
23"
(584mm)
93"
(2,362mm)
5 1/2"
(139mm)
21
Floor/
Ceiling
15"
(381mm)
19 1/4″ 23"
(584mm)
48"
(1,219mm)
93"
(2,362mm)
6 1/4"
(159mm)
19
15"
(381mm)
23"
(584mm)
48"
(1,219mm)
6 3/4"
(171mm)
22
15"
(381mm)
23"
(584mm)
48"
(1,219mm)
8"
(203mm)
25
15 1/2"
(394mm)
23 3/4"
(603mm)
48"
(1,219mm)
8 1/4"
(209mm)
30C
16"
(406mm)
19 1/4" 24"
(609mm)
48"
(1,219mm)
9 1/2"
(241mm)
30
15 1/2"
(394mm)
23 3/4"
(603mm)
48"
(1,219mm)
10 1/4"
(260mm)
38C
16"
(406mm)
24"
(609mm)
48"
(1,219mm)
12" (305mm)
38
16"
(406mm)
24"
(609mm)
48"
(1,219mm)
14"
(356mm)
49
*Delivers R18 value when installed in 5.5" deep cavity.
Installation
See Owens Corning publication “Installation Guide for Light Density
Insulation” (Pub. No. 10017858) for more information.
Environmental and Sustainability
Owens Corning is a worldwide leader in building material
systems, insulation and composite solutions, delivering a
broad range of high-quality products and services. Owens Corning
is committed to driving sustainability by delivering solutions,
transforming markets and enhancing lives. More information can
be found at www.owenscorning.com.
Certications and Sustainable Features
• Certied by SCS Global Services to contain an average of 65%
with minimum 47% post-consumer and balance 18%
pre-consumer recycled glass content
• GREENGUARD Certied products are certied to
GREENGUARD standards for low chemical emissions into
indoor air during product usage. GREENGUARD validated to be
Formaldehyde free. For more information, visit ul.com/gg
• Environmental Product Declaration (EPD) has been certied by
UL Environment
• Gold Material Health Certicate from Cradle to Cradle
Products Innovation Institute*
Notes
Fiberglass products may cause temporary skin and mucous
membranes itching due to the mechanical abrasion effects of
bers, a condition which is completely reversible. Owens Corning
does not recommend the use of unfaced EcoTouch
®
PINK
®
Fiberglas
™
Insulation in exposed applications where it will be subject
to routine human contact due to this potential temporary irritation.
For additional information, refer to the Safe Use Instruction Sheet
(SUIS) found in the SDS Database via
http://sds.owenscorning.com.
*Unfaced EcoTouch
®
insulation only.
*