Specification

ManualsBrandsOwens Corning ManualsBuilding materialsAttiCat Fiberglass Expanding Blown-in Insulation System

ATTICAT

PINK

BLOWN-IN

FIBERGLAS

INSULATION

OPTIMUM R-VALUE AND

COMPLETE COVERAGE

AttiCat

PINK

Blown-In Insulation is an unbonded loosell

Fiberglas™ thermal insulation. It is designed for use exclusively

with the AttiCat

machine.

Product Data Sheet | Atticat

PINK

Blown-In Insulation | November 2022

• Owens Corning

AttiCat

PINK

Blown-In Insulation can cover entire attic in less than 1.5 hours (1000 sq. ft.

attic with R-30)

• Puts AttiCat

Blown-in PINK

Insulation where you need it, providing optimum insulating R-value for your

climate zone

• Provides complete coverage, even around HVAC ducts, pipes, wires and outlets

AttiCat

PINK

Blown-In Insulation is designed for application in attics of new and existing homes.

Applications

Standards,

Code

Compliance

Features

ATTICAT

PINK

BLOWN-IN INSULATION Nominal Bag Weight 27.5 lbs.

R-VALUE BAGS PER

1000 SQ. FT.

MAXIMUM

NET

COVERAGE

MINIMUM

WEIGHT / SQ. FT.

MINIMUM THICK-

NESS (IN)

MINIMUM

SETTLED

THICKNESS

(MINNESOTA ONLY*)

ADDITIONAL INCHES

(MINNESOTA ONLY*)

ADDITIONAL BAGS PER

1000 SQ. FT.

R-13 5.9 169.8 0.162 5 5 0 0

R-19 9 110.7 0.248 7 7 0 0

R-22 10.5 94.8 0.29 8 8 0.25 0.30

R-26 12.6 79.3 0.347 9.5 9.5 0.5 0.9

R-30 14.6 68.5 0.402 10.75 10.75 1.0 1.6

R-38 19 52.6 0.523 13.5 13.5 1.5 2.5

R-44 22.4 44.6 0.616 15.5 15.5 1.5 2.6

R-49 25 39.9 0.688 17 17 2.0 3.7

R-60 31.5 31.8 0.866 20.5 20.5 2.5 4.9

*Minnesota Administrative Code requires insulation products to provide their stated R-value(s) at Winter Design Temperatures. These columns provide the additional inches and bags.

• AttiCat

PINK

Blown-In Insulation is:

• Noncorrosive per ASTM C764, section 12.7

• Does not absorb moisture per ASTM C1104

• Does not support mold growth per ASTM C1338

• Noncombustible by the model building codes per ASTM E136

• Manufactured in accordance with ASTM C764 Type I (pneumatic application)

• R-values are determined in accordance with ASTM C687

• The surface burning characteristics of this product have been determined in accordance with:

• Flame spread <0 per ASTM E 84

• Smoke developed <0 per ASTM E 84

• Conforms to the quality standards of the State of California

1. ASTM E 84 is thickness-dependent, therefore a range of values is given.

Summary of content (2 pages)

PAGE 1
ATTICAT PINK BLOWN-IN FIBERGLAS INSULATION OPTIMUM R-VALUE AND COMPLETE COVERAGE ® ® TM AttiCat® PINK® Blown-In Insulation is an unbonded loosefill Fiberglas™ thermal insulation. It is designed for use exclusively with the AttiCat® machine. Features • Owens Corning® AttiCat® PINK® Blown-In Insulation can cover entire attic in less than 1.5 hours (1000 sq. ft.
PAGE 2
Thermal Performance Stated R-value is achieved by installing the minimum required number of bags per 1,000 net sq. ft. at a thickness not less than the label minimum thickness and minimum sq. ft. weight. Failure by the installer to provide both the required number of bags and at least the minimum thickness will result in lower insulation R-value. All insulation varies in thermal performance due to factors such as mean temperature, settlement, convection, moisture absorption and installation variation.