Installation Guide

3
Choose Your View
Place the Cam and all cables 3 feet
away from the edge of the crib. Cables
within 3 feet of the edge of the crib
should be covered.
You can set up the Cam in two ways:
1 Place it on a flat surface using the
magnetic base and adjust for
desired tilt angle.
2 Mount it on a wall above the crib
using the base as a wall mount for
a bird’s-eye view of the crib or for
an expanded view of your nursery.
The next steps will guide you through
mounting the Cam on the wall (above
the crib).
You can also view our Installation Video
at support.owletcare.com