Owner`s Manual

2. Set vehicle speed indicator:
Indicates the set vehicle speed.
For Canadian models, the speed is dis-
played in km/h.
3. Set distance indicator:
Displays the selected distance between ve-
hicles set with the distance switch.
4. Vehicle ahead detection indicator:
Indicates whether it detects a vehicle in front
of you.
Operating ICC
To turn on the cruise control, quickly push
and release the CRUISE ON/OFF switch
䊊
A
on.
The ICC system ON indicator (white), set dis-
tance indicator and set vehicle speed indicator
come on in a standby state for setting.
To set cruising speed, accelerate your vehicle
to the desired speed, push the SET/COAST (–)
switch and release it. The ICC system set indica-
tor (green), vehicle ahead detection indicator, set
distance indicator and set vehicle speed indica-
tor
䊊
B
will come on.) Take your foot off the accel-
erator pedal. Your vehicle will maintain the set
speed.
When the SET/COAST (–) switch is pushed
under the following conditions, the system can-
not be set and the ICC indicators will blink for
approximately 2 seconds:
● When traveling below 20 MPH (32 km/h)
and the vehicle ahead is not detected
LSD2286 LSD2287
Starting and driving 5-41