User Manual
Table Of Contents
- Table of Contents
- 1. General Safety Requirements
- 2. Safety Terms and Symbols
- 3. General Characteristics
- 4. Quick Start
- 5. Front Panel Operation
- To set channels
- To set signals
- To Generate the Modulated Waveform
- To Generate Sweep
- To Generate Burst
- To Save and Recall
- To Set the Utility Function
- To Use Built-in Help
- 6. Communication with PC
- 7. SCPI
- 8. Troubleshooting
- 9. Technical Specifications
- 10. Appendix
5.Front Panel Operation
19
To Select the Built-in Waveform
There are 45 built-in Arbitrary waveforms.
Steps for selecting the built-in waveform:
(1) Press button, then press F4 to enter the Built-in Wform menu.
(2) Press F1 - F4 to select Common, Maths, Window or Others. E.g. select Maths
to enter the following interface.
(3) Turn the knob or press / direction key to choose the desired waveform. E.g.
select ExpRise. Press F1 to output the Exponential Rise waveform.
Built-in Waveform Table
Name
Explanation
Common
StairD Stair-down waveform
StairU Stair-up waveform
StairUD Stair-up and stair-down waveform
Trapezia Trapezoid waveform
RoundHalf RoundHalf wave
AbsSine Absolute value of a Sine
AbsSineHalf Absolute value of half a Sine
SineTra Sine transverse cut
SineVer Sine vertical cut
NegRamp Negative ramp
AttALT Gain oscillation curve
AmpALT Attenuation oscillation curve
CPulse Coded pulse
PPulse Positive pulse
NPulse Negative pulse
Maths
ExpRise Exponential rise function
ExpFall Exponential fall function