User Manual
Table Of Contents
- Table of Contents
- 1. General Safety Requirements
- 2. Safety Terms and Symbols
- 3. General Characteristics
- 4. Quick Start
- 5. Front Panel Operation
- To set channels
- To set signals
- To Generate the Modulated Waveform
- To Generate Sweep
- To Generate Burst
- To Save and Recall
- To Set the Utility Function
- To Use Built-in Help
- 6. Communication with PC
- 7. SCPI
- 8. Troubleshooting
- 9. Technical Specifications
- 10. Appendix
9.Technical Specifications
43
Accuracy
10 ns
Rising/Falling Edge Time
< 12 ns
Overshoot
< 5%
Jitter
AG1012F
AG1022F
1 ns + 30 ppm
AG2052F
AG2062F
300 ps + 100 ppm of period
Arbitrary
Waveform Length
AG1012F
AG1022F
2 – 8k points
AG2052F
AG2062F
2 - 1M points
Sample Rate
AG1012F
AG1022F
125 MSa/s
AG2052F
AG2062F
250 MSa/s
Amplitude Accuracy
14 bits
Minimum Rise/Fall Time
35 ns (typical)
Jitter (RMS)
6 ns + 30 ppm
Modulated Waveform
AM
Carrier Waveforms
Sine
Source
Internal/ External
Internal Modulating Waveforms
Sine, Square, Ramp, White Noise, Arbitrary
Internal AM Frequency
2 mHz - 20 kHz
Depth
0.0% - 100.0%
FM
Carrier Waveforms
Sine
Source
Internal/ External
Internal Modulating Waveforms
Sine, Square, Ramp, White Noise, Arbitrary
Internal Modulating Frequency
2 mHz - 20 kHz
Frequency Deviation
2 mHz - 20 MHz
PM
Carrier Waveforms
Sine
Source
Internal/ External
Internal Modulating Waveforms
Sine, Square, Ramp, White Noise, Arbitrary
Internal PM Frequency
2 mHz - 20 kHz
Phase Deviation
0° - 180°
FSK
Carrier Waveforms
Sine
Source
Internal/ External
Internal Modulating Waveforms
50% duty cycle square