User Manual
Table Of Contents
- Table of Contents
- 1. General Safety Requirements
- 2. Safety Terms and Symbols
- 3. General Characteristics
- 4. Quick Start
- 5. Front Panel Operation
- To set channels
- To set signals
- To Generate the Modulated Waveform
- To Generate Sweep
- To Generate Burst
- To Save and Recall
- To Set the Utility Function
- To Use Built-in Help
- 6. Communication with PC
- 7. SCPI
- 8. Troubleshooting
- 9. Technical Specifications
- 10. Appendix
3.General Characteristics
3
3. General Characteristics
These products are dual-channel multi-function generator which combines Arbitrary
Waveform Generation and Function Generation. The product introduces Direct Digital
Synthesizer (DDS) technology to provide stable, precise, pure and low distortion signal.
The user-friendly interface design and panel layout bring exceptional user experience.
Support USB storage device. Provide more alternative solutions for users.
Features and benefits:
3.9 inch high resolution (480 × 320 pixels) TFT LCD display;
Advanced DDS technology, max. 60 MHz frequency output;
Max. Sample rate: 250 MSa/s, Frequency resolution: 1 μHz;
Vertical resolution: 14 bits, max. 1 M waveform record length;
Abundant waveform output: 5 basic waveforms and 45 built-in arbitrary waveforms
output;
Exponential rise, Exponential fall, Sin(x)/x, Staircase, etc. 45 built-in waveforms and
user defined arbitrary waveform;
Abundant modulation functions along with output liner/logarithm sweep and pulse
string waveform;
Standard interface: USB port, USB (type B) connector.