User Manual

6.Bluetooth Function – B35(T) only
19
6. Bluetooth Function – B35(T) only
B35(T) multimeter supports communications with Android based smart device through
Bluetooth. You can use the free application software on the Android based smart devices
to monitor the measurements, perform remote control, view trending graphs, etc. The
recorded data can be saved as.CSV file. More than one meters can be connect
simultaneously.
Note: Bluetooth connectivity works over a range of about 10 meters. The work range is
much longer in open-sided and non-occluded wide range environment, even up to 20
meters. If the Bluetooth function in the multimeter is idle for 10 minutes, the Bluetooth
will be turned off automatically. Before turning off, the buzzer will sound “BeBe” two
times.
System Requirements of Mobile Devices
 Android devices with Bluetooth connectivity
 Android Versions: 4.0 and above (for the version 4.0 below, some functions are not
supported)
Install the application software
Install the free OWON application software (Multimeter.apk), it can be downloaded from
here:
Scan QR Codes below with your Android based smart device to install the app.
Visit www.owon.com to download APK file and install into the device.
Note: The help content below may be not completely consistent with the application
software,
only for reference. Visit www.owon.com to get the latest version of this user manual.
How to Connect
(1) Turn on the multimeter, press and hold until appear on the display.
(2) In Android based smart device, enter the Bluetooth settings, turn on Bluetooth, and
search for devices. Click "OWON BDM*******" in the device list to pare. ("*******"
is the serial number in the multimeter.)