User Manual

6.Bluetooth Function – B35(T) only
22
Function Description Table
Display
Function
Display
Function
DC
Direct Current
CAP
Measuring Capacitance
AC
Alternating Current
Hz
Measuring Frequency
RES
Measuring Resistance
DUT
Measuring Duty Cycle
DIO
Testing Diodes
hFE
Measuring Transistor
BEEP
Testing for Continuity
TEMP
Measuring Temperature
Operations
 Customize the meter name
The device name of meter can be customized. Press and hold the name on the top
left of the scree, a dialog box below will pop up. You can input the customized name,
this name will be memorized in the device. If this meter is connected to the same
device next time, the customized name will be shown. If this meter is connected to
another device, the name is still the default one or the customized name to the
connected device.
 Add meter: In double view, click softkey.

Select meter: In single or double view, click or softkey.

Disconnect meter: In single or double view, click or the meter name.

Remote Control: In single view, the control softkeys (blue background softkeys, as
Hold, Rel, Select, etc.) can be short or long pressed to perform control, just as press
the corresponding keys of multimeter.

Voice out function
Provide an audible out of the readings through the text-to-speech (TTS) engine on
your Android device. Click the
icon on the top right of the screen to turn on
voice out. Click
to turn off. In settings menu on your Android device, you can
set the language-specific voice for the spoken text, or speech rate etc.
You may change to different voices by installing different TTS engines.
TTS engines can be downloaded by scanning QR Codes or v
isit www.owon.com .