User Manual

4.Panel Operation
8
Set values of O.V.P
Set values of O.C.P
4.4 Memory key shortcut settings
Press Memory key on front panel, the M1, M2, and M3 keys can store five sets of channel
parameters M1, M2, M3, M4, and M5, respectively, for quick output.
4.4.1 Quick output
To output a set of parameters from M1 to M5, follow these steps:
(1) Press Memory key on front panel, the shortcut interface will display.
(2) Press ∨ key and shows the yellow select box. Press ∧ / ∨ to move the
select box.
(3) After selecting the certain parameter, press knob or OK on the panel to confirm
the input value.
Set values of voltage
Set values of current
Set values of O.V.P
Set values of O.C.P
4.4.2 Edit
To edit the channel parameters of M1 to M5, follow these steps:
(1) Press the front panel Memory button, the screen displays the quick setup interface.
(2) Press the ＞arrow keys to display the editing interface.
(3) Press the ∨ keys to show a red cursor.
(4) Press the ∧ / ∨ / ＜ / ＞ keys to move the red cursor between parameters.