User Manual

4.Panel Operation
10
Number
Press the System softkey and turn the knob to select the [Utility] menu. Press the ∨
arrow keys to choose Display submenu. Press the ＜ / ＞ arrow keys or turn the
knob to set the display mode to Number.
In system main interface, you can also press the OK key or press the knob to select the
Number display mode. When the power supply is powered on, the default display mode is
Number.
Curve
Press the System softkey and turn the knob to select the [Utility] menu. Press the ∨
arrow keys to choose Display submenu. Press the ＜ / ＞ arrow keys or turn the
knob to set the display mode to Curve.
In system main interface, you can also press the OK key or press the knob to select the
Curve display mode.
Curve Type
You can set the type of the displayed curve to voltage curve or current curve.
1) Voltage Curve
Two methods to set the curve type to voltage curve.
1st Method:
Press the System softkey and turn the knob to select the [Utility] menu. Press the ∨
arrow keys to choose Display submenu. Press the ＜ / ＞ arrow keys or turn the
knob to set the display mode to Curve. Press the ∨ arrow keys to choose CurveType
submenu, press the ＜ / ＞ arrow keys or turn the knob to set the curve type to Volt.
2nd Method: