User Manual

4.Panel Operation
11
In system main interface, you can also press the OK key or press the knob to select the
Curve display mode. Press the ∧ / ∨ arrow keys to select the Volt curve type.
The display mode of Volt curve is as below:
Note: In Volt curve display mode, you can still set the value of voltage or current. Press
the ＜ / ＞ arrow keys or turn the knob to enter editing mode (edit voltage first). If the
value is not changed, editing mode will be exited.
2) Current Curve
Two methods to set the curve type to current curve.
1st Method:
Press the System softkey and turn the knob to select the [Utility] menu. Press the ∨
arrow keys to choose Display submenu. Press the ＜ / ＞ arrow keys or turn the
knob to set the display mode to Curve. Press the ∨ arrow keys to choose CurveType
submenu, press the ＜ / ＞ arrow keys or turn the knob to set the curve type to Curr.
2nd Method:
In system main interface, you can also press the OK key or press the knob to select the
Curve display mode. Press the ∧ / ∨ arrow keys to select the Curr curve type.
The display mode of Curr curve is as below: