User Manual
Table Of Contents
- 1. General Safety Requirements
- 2. Safety Terms and Symbols
- 3. Quick Review
- 4. Panel Operation
- 5. Troubleshooting
- 6. Appendix
4.Panel Operation
12
Note: In Curr curve display mode, you can still set the value of voltage or current. Press
the ＜ / ＞ arrow keys or turn the knob to enter editing mode (edit current first). If the
value is not changed, editing mode will be exited.
Curve Time
Press the System softkey and turn the knob to select the [Utility] menu. Press the ∨
arrow keys to choose CurveTime submenu. Press the ＜ / ＞ arrow keys or turn the
knob to set the display mode to Curve. Press the ∨ arrow keys to choose CurveTime
submenu, press the ＜ / ＞ arrow keys or turn the knob to set the curve time to 30S
or 60S..
4.6 Interface Setting
(1) Press the ∨ arrow keys to select the baud rate, and press the ＜ / ＞ arrow
keys to set the baud rate of the RS232 serial interface. The optional values for the
baud rate are: 2400, 4800, 9600, 19200, 38400, 57600, 115200, and the factory
default setting is 115200. Make sure the instrument's baud rate setting matches the