User Manual

4.Panel Operation
13
baud rate setting of the computer you are using.
(2) Press the ∨ arrow keys to select the check digit and press the ＜ / ＞ arrow
keys to toggle None, Odd, Even.
(3) Press the ∨ arrow keys to select the stop bit, and press the ＜ / ＞ arrow keys
to toggle 1 or 2.
Note: The data bits submenu cannot be set, and the data bits are fixed at 8 bits.
4.7 System Information
4.7.1 Review System Information
Press the System softkey and turn the knob to select the [SYSTEM] menu. The screen
shows the model number, version number, serial number , and checksum of the machine.
4.7.2 Restore Factory Settings
Press the System softkey and turn the knob to select the [SYSTEM] menu. Press ∨
arrow keys to select the Factory Reset submenu. Press OK to restore the factory default
settings. See the factory setting detail table below
Output
Voltage
Current
5 V
2 A
Limit
Voltage
Current
31.00V
5.10A
System
Backlight
50%
Buzzer
On
Port
Port
Setting
Baud Rate
115200
Data Digit
8
Parity Check
None
Stop Digit
1
Display
Number