Installation Guide

ManualsBrandsOWT Ornamental Wood Ties ManualsComposite Fasteners1 in. Aluminum Hex Cap Nut

V2.00 - Installation Instructions, Specifications and Project Plans are effective 12/6/2016 . This information is updated periodically

and should not be relied upon after 2 years from 12/6/2016 . Please visit OZCOBP.com to get current information.

56621 & 86621

1-1/2" Hex Cap Nuts

Installation Instructions,

1-1/2" Hex Cap Nuts

Dome Cap Nuts

1" Hex Cap Nuts

Installation Instructions, Cap Nuts

56622 & 86622

Dome Cap Nuts

All Cap Nuts function the same

Hex Cap Nuts are standard on most products.

Dome Cap Nuts are standard on hinges.

Either are suitable in place of one another plus a variety of other uses.

Increased holding power of fasteners with additional surface area.

56681 & 86681

1" Hex Cap Nuts

Summary of content (7 pages)

PAGE 1
Installation Instructions, 1-1/2" Hex Cap Nuts Dome Cap Nuts 1" Hex Cap Nuts 56621 & 86621 1-1/2" Hex Cap Nuts 56622 & 86622 Dome Cap Nuts 56681 & 86681 1" Hex Cap Nuts All Cap Nuts function the same Hex Cap Nuts are standard on most products. Dome Cap Nuts are standard on hinges. Either are suitable in place of one another plus a variety of other uses. Increased holding power of fasteners with additional surface area. Installation Instructions, Cap Nuts V2.
PAGE 2
PAGE 3
Suggested Tools (others may be required) Installation Instructions, Cap Nuts V2.00 - Installation Instructions, Specifications and Project Plans are effective 12/6/2016 . This information is updated periodically and should not be relied upon after 2 years from 12/6/2016 . Please visit OZCOBP.com to get current information.
PAGE 4
Recommneded Fastener: OWT Timber Screws step 2 securing Cap Tool required 3/8" Driver (not included) finger tight step 1 securing fastener (not included) 1-1/2" Hex Cap Nut Installation Installation Instructions, Cap Nuts V2.00 - Installation Instructions, Specifications and Project Plans are effective 12/6/2016 . This information is updated periodically and should not be relied upon after 2 years from 12/6/2016 . Please visit OZCOBP.com to get current information.
PAGE 5
Recommneded Fastener: #8x1" (phillips head shown) step 2 securing Cap finger tight step 1 securing fastener (not included) Cap (finger tight) 4.5mm Allen Wrench 1" Hex Cap Nut Installation Installation Instructions, Cap Nuts Tool Required V2.00 - Installation Instructions, Specifications and Project Plans are effective 12/6/2016 . This information is updated periodically and should not be relied upon after 2 years from 12/6/2016 . Please visit OZCOBP.com to get current information.
PAGE 6
Recommneded Fastener: OWT Timber Screws Tool required 3/8" Driver (not included) step 2 securing Cap finger tight step 1 securing fastener (not included) Dome Cap Nut Installation Installation Instructions, Cap Nuts V2.00 - Installation Instructions, Specifications and Project Plans are effective 12/6/2016 . This information is updated periodically and should not be relied upon after 2 years from 12/6/2016 . Please visit OZCOBP.com to get current information.
PAGE 7
Dome Cap Nut Lightly tap with RUBBER mallet, then remove with fingers Hex Cap Nut (both sizes) Apply lubricant, then remove with driver/allen wrench Disassembly Method...if difficult Installation Instructions, Cap Nuts V2.00 - Installation Instructions, Specifications and Project Plans are effective 12/6/2016 . This information is updated periodically and should not be relied upon after 2 years from 12/6/2016 . Please visit OZCOBP.com to get current information.