OWT Timber Bolts installed Timber Bolts may be installed as standalone fastener or with many OZCO connector options Installation Instructions, OWT Timber Bolts shown with 56637 Post to Beam Bolt Inline connector dato cut required Installation Instructions, OWT Timber Bolts dato cut required V1.00 - Installation Instructions effective May 1, 2015 and reflects information that available as of April 10, 2014. This information is updated periodically and should not be relied upon after May 1, 2015.
19.05 .75 Assembly, OWT Timber Bolt 4-6" 56649-10 15.88 .63 3/4" clearance hole 38.10 1.50 [101-152] 4-6" Assembly, OWT Timber Bolt 6-8" 56650-10 25.40 1.00 .375 [152-203] 6-8" 15.24 .60 Assembly, OWT Timber Bolt 8-10" 56651-10 5/16" clearance hole [203-254] 8-10" Assembly, OWT Timber Bolt 10-12" 56652-10 [254-304] 10-12" OZCO Installation Instructions, OWT Timber Bolts V1.00 - Installation Instructions effective May 1, 2015 and reflects information that available as of April 10, 2014.
Suggested Tools (others may be required) Installation Instructions, OWT Timber Bolts V1.00 - Installation Instructions effective May 1, 2015 and reflects information that available as of April 10, 2014. This information is updated periodically and should not be relied upon after May 1, 2015. Please visit www.OZCOBP.
mark locations plate temporarily installed for installations without post to beam connector, proceed to next step step 1 Installation Instructions, OWT Timber Bolts V1.00 - Installation Instructions effective May 1, 2015 and reflects information that available as of April 10, 2014. This information is updated periodically and should not be relied upon after May 1, 2015. Please visit www.OZCOBP.
secure as desired beam can be nailed/screwed in place(instead of clamped) in area covered by plate shown in step 1 pencil marks plate from step 1 removed step 2 Installation Instructions, OWT Timber Bolts V1.00 - Installation Instructions effective May 1, 2015 and reflects information that available as of April 10, 2014. This information is updated periodically and should not be relied upon after May 1, 2015. Please visit www.OZCOBP.
3/4 drill through beam & post" step 3 Installation Instructions, OWT Timber Bolts installation example without post to beam connector V1.00 - Installation Instructions effective May 1, 2015 and reflects information that available as of April 10, 2014. This information is updated periodically and should not be relied upon after May 1, 2015. Please visit www.OZCOBP.
adjust as necessary before installation repeat on opposite side step 4 Installation Instructions, OWT Timber Bolts installation example without post to beam connector V1.00 - Installation Instructions effective May 1, 2015 and reflects information that available as of April 10, 2014. This information is updated periodically and should not be relied upon after May 1, 2015. Please visit www.OZCOBP.
(Hex Cap Nut) provided Tool Required 3/8" Driver 3/8" Driver install caps finger tight; both sides DO NOT USE POWER DRIVER cutaway view step 5 Installation Instructions, OWT Timber Bolts V1.00 - Installation Instructions effective May 1, 2015 and reflects information that available as of April 10, 2014. This information is updated periodically and should not be relied upon after May 1, 2015. Please visit www.OZCOBP.
