Installation Manual

FIG.H (for 24/30/36K)

FIG.I (for 42/48/60K)

6. Carefully align the plate of electric heat kit with the holes of the blower plenum, use the

screws removed in step 4 and Accessory pouch, then tighten the screws to hold the

electric heat kit to the plenum. (See Fig. H or I)

FIG.G

5. Slide electric heater into the slot.

Ensure heater support rod be placed into the

hole of blower compartment. (See Fig. G)

Place heater rod into the hole

of blower compartment