Replacement Part List
%0&7&/.03&"EETJEFSBJMTUPIFBQPWFSDVGU
Instructions for Wood Side Rails:
1) Recommended 1x3 Pine or similar.
2) Purchase below hardware/lumber from local hardware/Lumber store.
a) Qty. 24 - 3/8" Dia x 2.5" Grade 5 Carriage Bolts. (1X Front Rail & 2X Side Rails)
b) Qty. 24 - 3/8" Washer
c) Qty. 24 - 3/8" Nyloc Nut
d) Qty. 2 - 10' 1x3 Pine or similar
3) Cut Qty. 3 "Top" boards to a length of 38.5" out of one 10' 1x3.
4) Cut Qty. 3 "Bottom" boards to a length of 26.5" & "Upright" boards out of one 10' 1x3.
5) Drill Qty. 16 7/16" Dia. holes per the below drawing.
6) Center up front rail bottom board & C-Clamp to tub, then drill holes through tub & bolt together front rail.
7) Fully assembly side rails, then butt side top rail to front top rail, finally mark/measure placement
of side bottom rail.
a) Disassemble side bottom board & then locate in place where marked or measured & drill through tub.
b) Repeat for opposite side
8) Fully assemble wood rails