Installation Guide

Step 1

On a clean flat surface, lay table top upside down .

Step 3

Step 2

Insert the threaded rods on one corner post into

holes located on one corner of Table Top.

Step 5

Carefully turn the assembled End Table in an upright position.

Step 6

Using a medium grit sandpaper, quickly sand off any marks or

stains. Sand to smooth off areas around the dowel pins.

Assembly Instructions page 2 18” Square End Table

Step 4

Secure Corner Post to the Table Top using Metal Washer

and Hex Nut .

Repeat steps 2 and 3 for the remaining 3 Corner Posts.