Users Manual
Table Of Contents
Material Safety Data Sheets (MSDSs) MinITMaterial Safety Data Sheets (MSDSs) MinIT
The MSDSs for any chemicals supplied by Oxford Nanopore Technologies are available on request to
support@nanoporetech.com.
Read and understand the MSDSs before handling, working with or storing the chemicals being used within the Oxford
Nanopore Technologies® sequencing device.
Minimise contact with the chemicals by wearing protective clothing, safety glasses and gloves. The MSDS will carry specific
requirements.
Minimise inhalation of chemicals by using appropriate and adequate ventilation. The MSDS will carry any specific
requirements. Continuously check for any spills or leakages. If a spill or leak occurs, follow the clean-up guidelines provided
on the MSDS.
All components of the sequencing device should be handled, stored and disposed of in accordance with local,
state/provincial or national laws and regulations.
General precautions MinITGeneral precautions MinIT
When handling toxic, radioactive or pathogenic samples as defined by the WHO Laboratory Biosafety Manual, observe the
safety regulations of the specific local in question.
Do not use the sequencing device if it has suffered any damage, e.g. to power cables, data transfer cables, power supplies or
flow cells.
Page 8 of 14Nanopore Technical document
MinIT
Regulatory and Safety
Version: MTTD_5000_v1_revD_28Sep2018
Oxford Nanopore Technologies, the Wheel icon, GridION, Metrichor, MinION, MinKNOW, PromethION, SmidgION and VolTRAX are registered trademarks of Oxford Nanopore
Technologies Limited in various countries. © 2008 - 2017 Oxford Nanopore Technologies. All rights reserved. Registered Office: Oxford Science Park, Oxford OX4 4GA, UK |
Registered No. 05386273 | VAT No 874 642494 | Privacy Policy