Use and Care Manual

BOOKLET
OUTSIDE
INSIDE
StrongHold
™
Suction Grip Bar
USE & CARE
www.oxo.com
WARNINGS: Please read all warnings and instructions
thoroughly before use.
• This product is to be used as balance assist only. DO NOT use
it to support your full body weight. DO NOT lift yourself up
with this product. DO NOT hang from this product.
• This product is not a toy. It is not for use by children.
• This product is intended for temporary attachment and should
be periodically reapplied as instructed.
• To ensure maximum adhesion, you should re-attach the Grip
Bar before each use.
• This product must be installed correctly. Improper installation
may result in instability or failure.
• Be sure that the suction cups are attached to a completely
smooth, non-porous surface such as tile or glass. Placing the
suction cups over grout lines or cracks will prevent them from
holding properly and the Grip Bar will be unstable. DO NOT
place over grout lines.
• If left for a long period of time without testing adhesion, product
may detach and fall onto persons or property.
• DO NOT USE if suction cups have been damaged.
• DO NOT use on porous or uneven surfaces such as marble
or granite.
1. Press the suction cups against smooth, non-porous surface.
DO NOT position the suction cups over any grout lines.
2. Flip down both installation levers into locked position to activate suction.
3. Pull on Grip Bar to test, ensuring it is securely in place before
using; test before each use.
1
1
To Install
2
1. Determine whether to mount Grip Bar horizontally or vertically.
2. Wash desired area thoroughly with a warm, damp cloth and
dry completely.
3. Flip up both installation levers into the unlocked position.
To Prepare
1. Flip up both installation levers into the unlocked position.
2. Pull tabs to release suction cups.
To Remove
1
2
3