Operation Manual

Copyright OXX Digital 2007
18
Setting the clock
The clock on the WI-FI radio will set
automatically once connected to the internet,
however, should you need to adjust this
setting, proceed as follows;
1. Select ‘Configure’ from the main menu,
and press ‘SELECT’ to confirm.
2. Turn the multifunction control until
‘Clock’ is displayed. Press ‘SELECT’ to
confirm.
3. Turn the multifunction control until ‘Set
time’ is displayed. Press ‘SELECT’ to
confirm.
4. Turn the multifunction control to set the
hour. Press ‘SELECT’ to confirm.
5. Turn the multifunction control to set the
minutes. Press ‘SELECT’ to confirm.
6. The set time will be displayed.
Setting the alarm
Before setting the alarm, make sure that the
clock is correct.
To set the alarm, proceed as follows;
1. Select ‘Configure’ from the main menu,
and press ‘SELECT’ to confirm.
2. Turn the multifunction control until ‘Set
Alarm’ is displayed. Press ‘SELECT’ to
confirm.
3. Ensure that ‘YES’ is highlighted, then
press ‘SELECT’ to confirm.
4. Turn the multifunction control to set the
hour. Press ‘SELECT’ to confirm.
5. Turn the multifunction control to set the
minutes. Press ‘SELECT’ to confirm.
6. The alarm time will be displayed.
7. Press the ‘ON/OFF’ button. The display
will show two times.
8. The time on the left is the current time
and the time on the right is the alarm
time. When the time on the right is
reached, your WI-FI radio will turn on
and play the station or track that you
were last listening to.
Clock Functions