Instructions / Assembly

22.
Descale every 3 months and/or after the Descaling
Indicator turns on. Descaling helps remove calcium
deposits, called scale, that can build up inside the
machine. You may need to descale more frequently
if the water in your area has higher mineral content.
Regular descaling is important to ensure the proper
performance of your machine.
To Descale:
1. Remove the Water Filter and fill the Water Tank
with 1 liter of descaling agent or undiluted white
vinegar. If using descaling agent, refer to its
instructions for descaling steps.
2. Place the Water Tank back in the machine.
3. Place a large coffee cup (8 oz. minimum) toward
the back of the Drip Tray.
4. Make sure the Brew Button is lit and there is no
K-Cup
®
in the Brewing Compartment.
5. Press the 8 oz. Cup Button to run a descaling
cycle. Discard the liquid when finished.
6. Run additional descaling cycles until the Water
Tank is empty. Allow the machine to sit for 1 hour.
7. Empty the Water Tank and rinse thoroughly with
warm water. Fill with fresh water.
8. Run 5 brewing cycles without a K-Cup to flush the
system. If you notice a residual taste, perform
additional brewing cycles.
9. If the Hot Water dispenser is used frequently,
then press the Hot Water Button and repeat
steps 1-8.
10. Replace the Water Filter. Your machine is now
ready to use again.
Cleaning & Maintenance (continued)
Descaling
Resetting the
Descale Indicator
To reset the Descale Indicator press and hold the Brew
Button for 5 seconds.