Installation Guide

BODYSPA RV
USING THE
SMARTPAUSE VALVE
Located at the base of the BodySpa® wand, the
SmartPause® valve allows you to pause your shower
while you lather up.
To pause the shower spray: Gently push the button
on the SmartPause® valve from left to right to pause
the shower’s flow. To resume flow, simply push
button back to the left.
STEP 1
Remove your existing
shower head. To
remove, turn the
existing shower head
in a counterclockwise
direction.
STEP 2
Remove any remnants
of old plumber’s tape
and flush out shower
pipe for 5 to 10
seconds.
STEP 5
Attach wide end of the
SmartPause® valve to
base of the handheld
shower and hand
tighten. Attach smooth
end of the hose to
opposite end of the
SmartPause® valve.
STEP 3
Wrap plumber’s tape
clockwise 3 or 4 turns
around threaded end
of shower arm.
STEP 6
Attach double stick
tape provided to back
of holder and press
firmly to clean, dry
shower wall. Place your
new handheld shower
head into holder.
EASY INSTALLATION
INSTRUCTIONS
STOP!
NEED HELP?
PLEASE DO NOT RETURN THIS
PRODUCT TO THE STORE.
If you need installation assistance, replacement
parts or have questions regarding our warranty, our
Customer Service team can be contacted by:
PHONE:
1-866-440-9257
or
775-420-5600
LIVE CHAT:
www.oxygenics.com
EMAIL:
[e-mail]
ONLINE:
www.oxygenics.com/claims
Business hours:
Monday - Thursday 7:00 am to 5:00 pm PST
Friday 7:00 am to 4:30 pm PST*
*Closed on all nationally observed holidays
For use with automatic
compensating valves
rated at 1.35 GPM
(5.11 L/min) or less.
ATTENTION:
SMOOTH END OF HOSE ATTACHES TO
SHOWER HEAD
STEP 4
In a clockwise
direction, screw end
of hose to the taped
portion of the shower
arm. Hand tighten
only.