Installation Guide

Orbit
EASY INSTALLATION
INSTRUCTIONS
CHANGING
SPRAY
PATTERNS
Spray patterns may be
changed easily using
the switch located
on the orbital. Simply
move the easy spray
selector from side to side to
alternate spray patterns.
USING THE ORBITAL
The orbital can be rotated 360º
around the rain shower giving you
total coverage. Simply slide the orbital
clockwise until the desired position is
reached. The orbital’s angle can also
be changed by gently tilting the unit
forward or back.
WHAT’S INCLUDED
+
Rain Shower Head
+
Plumber’s Tape
STEP 3
Wrap plumber’s tape
clockwise 3 or 4 turns
around threaded end of
shower arm.
STEP 1
Remove your existing
shower head. To
remove, turn the
existing shower head
in a counterclockwise
direction.
STEP 4
In a clockwise direction,
screw your new shower
head onto the taped
portion of the shower arm.
Hand tighten only.
STEP 2
Remove any remnants of
old plumber’s tape and
flush out shower pipe for
5 to 10 seconds.
STOP!
NEED HELP?
PLEASE DO NOT RETURN THIS
PRODUCT TO THE STORE.
If you need installation assistance, replacement
parts or have questions regarding our warranty
please contact customer service at
1.866.440.9257
or 1.775.420.5600
Support is also available via email at
[e-mail]
Be sure to visit our website at
www.oxygenics.com
Business Hours:
Monday-Thursday 7:00 am to 5:00 pm PST
Friday 7:00 am to 4:30 pm PST
For use with automatic
compensating valves
rated at 1.50 GPM
(5.68 L/min) or less.