Installation Guide
EASY TWIST
SPRAY SELECTION
Enjoying multiple spray patterns
during your shower has never
been easier. With
the Darth Vader
Handheld Shower
Head easy twist
design, simply
rotate the shower
head for a quick
spray change.
oxygenics.com
© & ™ LUCASFILM LTD.
© DISNEY
Darth Vader
™
Handheld
Shower Head
STEP 1
Remove your
existing shower
head. To remove,
turn the existing
shower head in a
counterclockwise
direction.
STEP 2
Remove any
remnants of old
plumber’s tape
and ush out
shower pipe for
5 to 10 seconds.
STEP 3
Wrap plumber’s
tape clockwise
3 or 4 turns
around threaded
end of shower
arm.
STEP 4
In a clockwise
direction, screw
handheld holder
onto the taped
portion of shower
arm. Hand
tighten only.
STEP 5
Attach grooved
end of hose to
handheld holder
and hand tighten.
STEP 6
Attach smooth end
of hose to base
of handheld and
hand tighten. Insert
your new handheld
shower in holder.
EASY INSTALLATION
INSTRUCTIONS
ATTENTION:
WASHERS PRE-INSTALLED IN HOSE ENDS
Washers must be inserted into both hose ends for proper installation.
USING THE
COMFORT CONTROL
Located on the back of
the shower head, the
ow control regulator
eliminates sudden blasts
of water. Note: The ow
control is not a shut off valve. When turned to the
lowest position, the shower head continues to
ow. This is a normal safety feature. Unit may be
in lowest ow position during shipping. Check the
position of ow control upon installation.
NO TOOLS
NEEDED
For use with automatic
compensating valves rated at
5.678 L/min (1.5 gpm) or less
STOP! NEED HELP?
PLEASE DO NOT RETURN
THIS PRODUCT TO THE STORE.
If you need installation assistance, replacement
parts or have questions regarding our warranty
please contact customer service at
1.866.440.9257
or 1.775.420.5600
Support is also available via
email at support@oxygenics.com
Be sure to visit our
website at oxygenics.com
Business Hours: Monday-Thursday 7:00 am to 5:00 pm PST
Friday 7:00 am to 4:30 pm PST