Installation Guide

ManualsBrandsOxygenics ManualsBathPowerSelect 7-Spray 3.38 in. Fixed Showerhead in Brushed Nickel

STOP!

NEED HELP?

PLEASE DO NOT RETURN THIS

PRODUCT TO THE STORE.

If you need installation assistance, replacement

parts or have questions regarding our warranty

please contact customer service at

1.866.440.9257

or 1.775.420.5600

Support is also available via email at

support@oxygenics.com

Be sure to visit our website at

www.oxygenics.com

Business Hours: Monday-Friday

7:00 am to 4:30pm PST

EASY INSTALLATION

INSTRUCTIONS

STEP 3

Wrap plumber’s tape

clockwise 3 or 4 turns

around threaded end of

shower arm.

STEP 1

Remove your existing

shower head. To

remove, turn the

existing shower head

in a counterclockwise

direction.

STEP 4

In a clockwise direction,

screw your new shower

head onto the taped

portion of the shower arm.

Hand tighten only.

STEP 2

Remove any remnants of

old plumber’s tape and

ﬂush out shower pipe for

5 to 10 seconds.

WHAT’S INCLUDED

Fixed Shower Head

Plumber’s Tape

EASY TWIST

SPRAY SELECTION

Enjoying multiple spray

patterns during your

shower has never

been easier. With

the PowerSelect’s

easy twist

design, simply

rotate the easy

spray selector for a

quick spray change.

PowerSelect

Summary of content (2 pages)

PAGE 1
PowerSelect Easy Installation Instructions Step 1 Step 2 Step 3 Step 4 Remove your existing shower head. To remove, turn the existing shower head in a counterclockwise direction. Wrap plumber’s tape clockwise 3 or 4 turns around threaded end of shower arm. Remove any remnants of old plumber’s tape and flush out shower pipe for 5 to 10 seconds. In a clockwise direction, screw your new shower head onto the taped portion of the shower arm. Hand tighten only.
PAGE 2
PowerSelect Instrucciones para la instalación fácil PASO 1 PASO 2 PASO 3 PASO 4 Quite su cabezal de ducha existente. Para la extracción, gire el cabezal de ducha existente en el sentido contrario a las agujas del reloj. Envuelva con cinta de plomero en el sentido de las agujas del reloj con 3 o 4 vuelvas alrededor del brazo de ducha. Quite cualquier remanente de vieja cinta de plomería y enjuague el caño de la ducha durante 5 a 10 segundos.