Manual

23
RAID CONFIGURATION
To assign and create the RAID System’s inserted hard drives into a preferred
RAID Mode, using the LCM only, please follow the steps listed in the instructions
provided below:
1. Turn ‘On’ the RAID System. After “initializing”, it will display “DataTale
ONNTO Corp.”. Under Main Menu, press Down Button (∨
∨∨
∨) to select
‘Quick Setup’ and press Enter (↵
↵↵
↵).
Main Menu
Quick Setup
2. Select ‘Create One RAID’ and press Enter (↵
↵↵
↵).
Create One RAID
Quick Setup:
3. Use the Up (∧
∧∧
∧) and Down Buttons (∨
∨∨
∨) to select which RAID Mode to use.
Select Level:
RAID 0
If not enough hard drives are inserted inside the RAID System, then it
will display “Disk Not Enough, Cannot Create!”