Instruction Manual



CONFIGURATION & REBUILD

Create A RAID

To setup RAID functions for the RAID System, please complete the following

steps:

Creating a new RAID mode will delete all data stored on the hard disk(s). If

you have important saved data in the hard drives, backup all data before

formatting the RAID Mode.

1. Under the “Configuration” option tab, select the RAID mode preferred and

click the “Create RAID/Apply” icon.

If cannot see what is/are connected as part of the RAID System, press the

“Refresh” button on top of the first sub-menu (top). The information should

appear afterwards.

Please review the RAID mode options under “RAID MODES” to choose the

best suitable RAID mode for your needs and desire. If the number of inserted

hard disk does not qualify the quantity needed for a particular RAID mode, the